Flooring solutions fibres product range
Our different levels of wire tensile strength are dedicated to different levels of expected performance of the concrete element reinforced with our steel fibres.
The High Tensile Strength steel fibres, made with a wire tensile strength ranging from 900 MPa to 1500 MPa (2 to 3 times the tensile strength of normal rebars), are proposed in low duty floors where the concrete performance and ductiliy requirements are corresponding to lower level of loadings.
The Very High Tensile Strength between 1500 MPa and 1900 MPa) are used in industrial slabs on grade where the loadings are higher, and traffic of forklifts or trucks are more intense. They are also used in slabs on piles submitted to low loads. The recommended minimum concrete compressive strength class is C30/37.
The Ultra High Tensile Strength steel fibres (tensile strength 1900 MPa to 2400 MPa) are recommended for industrial slabs on grade submitted to heavy loads and severe traffic conditions, and also for slabs on piles of any type. These Ultra High Tensile steel fibres require a high compressive strength concrete to allow their potential to be activated fully (above C35/45 class for the ++ quality and above C50/60 for the 3+ quality).
Fibre types
